-Last hit calculation seems to be a lot better. That's good.
-Haven't test many spell farm but the one on PA is great.
-The new Orbwalk for Farm and Force deny mode is clunky. I felt like I have to be very close to a creep and stand still for it to effectively LH & D9 every creep. It also cancel a lot of attack because I stand on the edge of the attack range. I think it can be fixed by adding a Bonus Range slider similar to SDK.
Как вернуть деньги? уже в который раз очко горит из за твоих скриптов... тупо фиданул пару раз.... пока не нашел чтоб отключить... в общем отписка и удаляю... и верни деньги...
again , nobody cares but i didnt buy it before, i wanna buy now but THERE IS NO PLACE I SEE THAT F...NG SCRIPT . NOT ENSAGE DATABASE, NOT ON WEBSİTE BLOW ASSEMBLY LIST , THERE IS NO BUY OR TRY SECTION BELOW THE EXPLANATION
for some reason it doesn't save my setting. when i am in demo mode to update my keys and quit from demo mode, it keeps going back to default setting. is it just me?
@bob001 said:
for some reason it doesn't save my setting. when i am in demo mode to update my keys and quit from demo mode, it keeps going back to default setting. is it just me?
@bob001 said:
for some reason it doesn't save my setting. when i am in demo mode to update my keys and quit from demo mode, it keeps going back to default setting. is it just me?
@freepirate said:
again , nobody cares but i didnt buy it before, i wanna buy now but THERE IS NO PLACE I SEE THAT F...NG SCRIPT . NOT ENSAGE DATABASE, NOT ON WEBSİTE BLOW ASSEMBLY LIST , THERE IS NO BUY OR TRY SECTION BELOW THE EXPLANATION
I have a problem. my settings doesn't save. it keeps going back to default setting after demo so i have to reconfig my keys and stuff. did i do something wrong or not know how to use it?
the default setting uses the keys zxcv, but i use those for my inventory.
@mohaimen said:
what is the key for AUTO LH or how it work ?
It sends selected units to near line for auto push/lh. Full auto.
Usefull for necronomicon/illusions/other summoned units.
@bob001 said:
I have a problem. my settings doesn't save. it keeps going back to default setting after demo so i have to reconfig my keys and stuff. did i do something wrong or not know how to use it?
the default setting uses the keys zxcv, but i use those for my inventory.
For save mode settings you shoul pres save key (by default it is numpad0)
@ralph_repato said: @SirLimon tested in lobby. Great work! However I'm also having a hard time with the FPS drop. It's pretty significant. Ty bud
Did you have a problem after the last update with fix or before (first V3 version)?
now server side on update. After few hours script will be updated.
Whats New?
Total Cleanup. Now works more correct
More easy configuration
New Farm mode. Added orbwalking / prediction for LH / Dyny
Works only for single unit
Better for no backswing
New Depush mode. Added orbwalking / prediction for LH / Dyny
Works only for single unit
Better for no backswing
New Jungle mode. Allow for more easy kiting creeps
New Under Tower helper. More accurate and now works with creeps
Zuus arc lighting fix. MinHit now working
Invoker Exort AA. Take into account exort orbs and use it
Reworked LH logic.
Controllable LH. Now every controllable unit can be used for lasthit
Multi controllable lasthit. Now you can lasthit with controllable groups (like lucan woolwes / invoker spirit / chen creeps / enigma and furion summoned creeps)
Auto push mode. You can select group for auto push line and farm. Like necronomicon / illusions / controllable creeps
Profile system separated by Hero.
Profile BD and signup. Now you can share profiles and find usefull ones. You can vote for promote some profiles.
Whats next?
More spell farm configs (separated by spells)
Some other improvements
amazing !! , next update can u add creep wave clear using all spells ?
-The FPS issue is fixed for me. However, ticking "Prepare creep under tower" cause massive FPS drop.
-The orbwalker seems to be better, less clunky, but there are still some minor problem:
1. Sometimes when I walk up to a creep holding farm key it will cancel AA.
2. Sometimes when I switch from LH mode to Force deny mode, the orbwalker just stop completely. This probelm has been present since V2 but it's not that big of a deal.
3. Sometimes when I hold Farm key and drag the mouse in one direction, then snap it back to the creep so it will walk up to it, it doesn't go to the creep, but still continue walking in the direction that I drag my mouse earlier, causing it to miss LH.
-Specific hero problem : I believe the script didn't take into account Ursa Fury Swipes. This is a huge deal when playing Ursa because he has low base damage and depends on his E to last hit.
Попробовал сыграть демо на шторме поластхитить все нормально работало, потом пошел в лобби и он вообще работать перестал, но только на шторме (не реагирует на все кнопки, кроме agro и unagro). На остальных героях работает нормально.
The same situation. Works good on sf, but once its just stop working and that is all. All hero lasthit and deny, sf doesn't react on any bind...
How I can fix it?
EDIT: i saved the profile on sf by Numpad0 and its stoped work. Other heroes didn't save, and works correctly. How can i delete saved SF profile, not in DB, just on my PC
@MinpoJke said:
The same situation. Works good on sf, but once its just stop working and that is all. All hero lasthit and deny, sf doesn't react on any bind...
How I can fix it?
EDIT: i saved the profile on sf by Numpad0 and its stoped work. Other heroes didn't save, and works correctly. How can i delete saved SF profile, not in DB, just on my PC
-The FPS issue is fixed for me. However, ticking "Prepare creep under tower" cause massive FPS drop.
-The orbwalker seems to be better, less clunky, but there are still some minor problem:
1. Sometimes when I walk up to a creep holding farm key it will cancel AA.
2. Sometimes when I switch from LH mode to Force deny mode, the orbwalker just stop completely. This probelm has been present since V2 but it's not that big of a deal.
3. Sometimes when I hold Farm key and drag the mouse in one direction, then snap it back to the creep so it will walk up to it, it doesn't go to the creep, but still continue walking in the direction that I drag my mouse earlier, causing it to miss LH.
-Specific hero problem : I believe the script didn't take into account Ursa Fury Swipes. This is a huge deal when playing Ursa because he has low base damage and depends on his E to last hit.
@MinpoJke said:
The same situation. Works good on sf, but once its just stop working and that is all. All hero lasthit and deny, sf doesn't react on any bind...
How I can fix it?
EDIT: i saved the profile on sf by Numpad0 and its stoped work. Other heroes didn't save, and works correctly. How can i delete saved SF profile, not in DB, just on my PC
@anonymouse said:
binded keys doesnt work, it just stopped working.
Ty for feedback. I'll check all issues and fix it fast as possible.
All saved profiles can be founded in Dota folder. Try find *.sjon files. It will be named as Hero name.
Well found problem with PA example.
What happens when it last hit creep and when i move my cursor it's just need like 0.5 sec to move , standing in place resulting into missing some cs or denies.
I think this is happening with every melee hero.
@Zlotvor92 said:
Well found problem with PA example.
What happens when it last hit creep and when i move my cursor it's just need like 0.5 sec to move , standing in place resulting into missing some cs or denies.
I think this is happening with every melee hero.
Can you make short video explanation? Or explain more detailed
@Zlotvor92 said:
Well found problem with PA example.
What happens when it last hit creep and when i move my cursor it's just need like 0.5 sec to move , standing in place resulting into missing some cs or denies.
I think this is happening with every melee hero.
Can you make short video explanation? Or explain more detailed
Thanks for the fixes. It's working now but there are issues that I have. There is like a 0.5 second delay after the hero last hit. I don't know if that's part of the script but in a real game I wouldn't want to sit there after I throw an attack or harass.
The original SDK has a setting in which you can control the hero's hold delay, turn delay, attack delay and hold position range, makes it safer to farm because I can just last hit and run back to tower.
I also did some test on SF with zero item, zero upgrade, attacking near SF max attack range, constant moving like I am going to get ganked for the original free last hit and your last hit script. Here are the result.
PAID SCRIPT (I show the setting I am using because I want that setting so I can pull creep/harass hero while I last hit and deny. These setting is why I bought the script so please don't have me remove any of these setting so that I can get more last hit because the free last hit script works fine for last hitting.)
FREE SCRIPT (The setting for the free script helps a lot because after hero throws his attack, he backs away right away. Zero delays)
PAID SCRIPT
FREE SCRIPT
PAID SCRIPT (did an extra one with more standing, but still trying to attack near max range)
Those are the results. If anyone else want to try this and verify that would be nice. Will do a melee test later.
Comments
HOOORAY!
Герой не отлипает от крипов, лезет под башню и фидит, произошло внезапно. Итог: слитая игра...
Это AUTO LH Mode наверное включился. Я пока не понял как его выключить до смерти героя.
Авто мод был включен?
Если да, то это уже исправляю. Его нельзя остановить. Не используй пока для героя его, только для крипов
How to turn off Auto mode ? My hero randomly starts auto lasthitting and then he sticks to the creeps and I can't turn it off.
lots of fps drop need fix.
Слишком сильно стало просидать, ФПС до 20-40 прыгает. Можно уменьшить проседания?
Какой то гайд по настройке значений для разных героев будет? Или хотя бы как это должно работать идеально в лобби на конкретном герое?
Guys, why i cant see that assmbly ? ... Not in my ensage database , i cant find it here too ...
Other than this. Very good prediction. Even more accurate than before! Well done.
авто ластхид мод включается при начали игры. нужна русская инструкция по читу.
сделайте чтобы кнопки теже самые оставались ) на каждого героя приходиться по новой хоткеи ставить
Feedback:
-Last hit calculation seems to be a lot better. That's good.
-Haven't test many spell farm but the one on PA is great.
-The new Orbwalk for Farm and Force deny mode is clunky. I felt like I have to be very close to a creep and stand still for it to effectively LH & D9 every creep. It also cancel a lot of attack because I stand on the edge of the attack range. I think it can be fixed by adding a Bonus Range slider similar to SDK.
-FPS drop compared to the V2
Как вернуть деньги? уже в который раз очко горит из за твоих скриптов... тупо фиданул пару раз.... пока не нашел чтоб отключить... в общем отписка и удаляю... и верни деньги...
again , nobody cares but i didnt buy it before, i wanna buy now but THERE IS NO PLACE I SEE THAT F...NG SCRIPT . NOT ENSAGE DATABASE, NOT ON WEBSİTE BLOW ASSEMBLY LIST , THERE IS NO BUY OR TRY SECTION BELOW THE EXPLANATION
Guess what , i dont care anymore too ...
for some reason it doesn't save my setting. when i am in demo mode to update my keys and quit from demo mode, it keeps going back to default setting. is it just me?
Mine is saving fine.
I'll push some fixes. Try again please.
Сделал небольшие фиксы. Проверьте остались ли проблемы с FPS
You should use save key (defailt it is numpad0)
Direct link
https://www.ensage.io/database#223
Сделаю завтра, пока с серьезными багами разбираюсь
Будет инструкция чуть позже.
А вообще на настройках по умолчанию почти все мили и половина рендж чемпионов работают хорошо
Update
-Posible fix to FPS drop. Plese confirm it???
-Fix for canceling auto mode. (send move command to units for stop auto LH)
-Fix some exeptions
is this all that is suppose to be in the menu?
Yes, all main configuration in MainConfig tab. There are many settings
what is the key for AUTO LH or how it work ?
I have a problem. my settings doesn't save. it keeps going back to default setting after demo so i have to reconfig my keys and stuff. did i do something wrong or not know how to use it?
the default setting uses the keys zxcv, but i use those for my inventory.
@SirLimon tested in lobby. Great work! However I'm also having a hard time with the FPS drop. It's pretty significant. Ty bud
It sends selected units to near line for auto push/lh. Full auto.
Usefull for necronomicon/illusions/other summoned units.
For save mode settings you shoul pres save key (by default it is numpad0)
Did you have a problem after the last update with fix or before (first V3 version)?
Great script. However it sometimes just stop working until i restart the game. Is this Ensage problem or script problem? :(
it works when i do demo but does not work when i play normal game. :/ reloading does not help it either.
so... it work sometimes and other time it does not work. also can my keys be default for all heros instead of just one?
amazing !! , next update can u add creep wave clear using all spells ?
Feedback with lastest update:
-The FPS issue is fixed for me. However, ticking "Prepare creep under tower" cause massive FPS drop.
-The orbwalker seems to be better, less clunky, but there are still some minor problem:
1. Sometimes when I walk up to a creep holding farm key it will cancel AA.
2. Sometimes when I switch from LH mode to Force deny mode, the orbwalker just stop completely. This probelm has been present since V2 but it's not that big of a deal.
3. Sometimes when I hold Farm key and drag the mouse in one direction, then snap it back to the creep so it will walk up to it, it doesn't go to the creep, but still continue walking in the direction that I drag my mouse earlier, causing it to miss LH.
-Specific hero problem : I believe the script didn't take into account Ursa Fury Swipes. This is a huge deal when playing Ursa because he has low base damage and depends on his E to last hit.
Awesome script, works perfectly. Definitely worth the price.
Попробовал сыграть демо на шторме поластхитить все нормально работало, потом пошел в лобби и он вообще работать перестал, но только на шторме (не реагирует на все кнопки, кроме agro и unagro). На остальных героях работает нормально.
Вообще перестал реагировать на любые хот-кеи, как не биндил. Настройки сбрасывал, конфиг удалял.
The same situation. Works good on sf, but once its just stop working and that is all. All hero lasthit and deny, sf doesn't react on any bind...
How I can fix it?
EDIT: i saved the profile on sf by Numpad0 and its stoped work. Other heroes didn't save, and works correctly. How can i delete saved SF profile, not in DB, just on my PC
all saved profile stops working. agree.
binded keys doesnt work, it just stopped working.
Ty for feedback. I'll check all issues and fix it fast as possible.
All saved profiles can be founded in Dota folder. Try find *.sjon files. It will be named as Hero name.
Well found problem with PA example.
What happens when it last hit creep and when i move my cursor it's just need like 0.5 sec to move , standing in place resulting into missing some cs or denies.
I think this is happening with every melee hero.
залей пока что старую версию ! пожалуйста тут очень много багов
Couldn't find anything in the "dota" folder of "dota 2 beta" folder. Can you tell us exactly where the files are stored?
auto farm no work
Can you make short video explanation? Or explain more detailed
\SteamLibrary\steamapps\common\dota 2 beta\game\bin\win64
Explain more detailed.
Will post video in like 2 hours
Thanks, I fixed the issue.
Version 3.1 Released
Thanks for the fixes. It's working now but there are issues that I have. There is like a 0.5 second delay after the hero last hit. I don't know if that's part of the script but in a real game I wouldn't want to sit there after I throw an attack or harass.
The original SDK has a setting in which you can control the hero's hold delay, turn delay, attack delay and hold position range, makes it safer to farm because I can just last hit and run back to tower.
I also did some test on SF with zero item, zero upgrade, attacking near SF max attack range, constant moving like I am going to get ganked for the original free last hit and your last hit script. Here are the result.
===================================================================
PAID SCRIPT (I show the setting I am using because I want that setting so I can pull creep/harass hero while I last hit and deny. These setting is why I bought the script so please don't have me remove any of these setting so that I can get more last hit because the free last hit script works fine for last hitting.)
FREE SCRIPT (The setting for the free script helps a lot because after hero throws his attack, he backs away right away. Zero delays)
PAID SCRIPT
FREE SCRIPT
PAID SCRIPT (did an extra one with more standing, but still trying to attack near max range)
Those are the results. If anyone else want to try this and verify that would be nice. Will do a melee test later.